64 results found.
31 - 40 of 64 results
Noise suppression technologies/case study introduction (Consumer)
MIPI is a signal transmission system for smart phone displays and camera lines. Because differential signals and single-end signals are mixed within MIPI D-PHY, a form of noise suppression that takes this into account is required.
Noise suppression technologies/case study introduction (Consumer)
Thunderbolt™ is a high-speed digital interface developed by Intel that is capable of reaching a maximum communication speed of 40 Gbps. The noise filter suited to this circuit was studied while comparing it with USB 3.1.
Noise suppression technologies/case study introduction (Automotive)
Because an Ethernet cable lacks a ground wire in contrast to USB and other cables, it is easier for radiation noise to occur due to common mode currents. This section explains noise suppression in the 100Base-T1 Automotive Ethernet standard.
Noise suppression technologies/case study introduction (Automotive)
Because an Ethernet cable lacks a ground wire in contrast to USB and other cables, it is easier for radiation noise to occur due to common mode currents. This section explains noise suppression in the 100Base-T1 Automotive Ethernet standard.
Noise suppression technologies/case study introduction (Consumer)
We surveyed USB 3.1 noise problems and examined the use of a noise filter, ground reinforcement, and cable changes.
Noise suppression technologies/case study introduction (Consumer)
MIPI is a signal transmission system for smart phone displays and camera lines. MIPI C-Phy is capable of transmitting at higher speeds than conventional D-PHY, but because it uses a three-line configuration, a suppression method that differs from the typical noise suppression is required.
Noise suppression technologies/case study introduction (Consumer)
Noise suppression in home audio must be performed in both the signal line and the power supply line. This section explains how to suppress noise without losing sound quality.
Noise suppression technologies/case study introduction (Consumer)
Noise suppression in home audio must be performed in both the signal line and the power supply line. This section explains how to suppress noise without losing sound quality.
Noise suppression technologies/case study introduction (Automotive)
Effective ways to suppress noise in the DC-DC converters used in the power supply lines of automotive devices include attaching a common mode choke coil and configuring an LPF with an inductor and a capacitor.
Noise suppression technologies/case study introduction (Automotive)
Effective ways to suppress noise in the DC-DC converters used in the power supply lines of automotive devices include attaching a common mode choke coil and configuring an LPF with an inductor and a capacitor.
