34 results found. 1 - 10 of 34 results
In smart factories, electromagnetic noise from industrial equipment can interfere with wireless communications, potentially causing communication failures. This article explains the impact of such interference and the latest EMC (Electromagnetic Compatibility) countermeasures.
Inductor Guide
We explain here the factors that suppress the tilt that is liable to occur during mounting for small film type RF inductors (01005 size (0.4 × 0.2 mm) and 0201 size (0.6 × 0.3 mm)) that use L-shaped electrodes.
Supporting the Transition away from Fossil Fuels with the Power of Electronic Components
There is a move to update the base material of devices from Si to SiC or GaN in the power semiconductor field to accelerate the pace of efforts to achieve carbon neutrality. We explain here what technological advances are needed in peripheral components such as capacitors and inductors to maximize the effect of that update.
・Aims and content of this fundamental knowledge series
・Direct current/alternating current, resistance/inductors/capacitors, voltage/current/electric power, relation to Ohm's Law
・Voltage and current of a direct current circuit connected to an ideal resistance/inductor/capacitor
PoC, which can reduce the number of cables connecting to automotive cameras, requires a Bias-T circuit to separate the signals and power supply. Inductors for such circuits cannot simply be selected, but they can be easily selected by using Murata’s online tool (BIST). Therefore, we spoke with the managers who were involved in the development of BIST about the features and objectives in releasing the tool. This is an introduction to a technology article about Murata Manufacturing.
Noise suppression technologies/case study introduction (Automotive)
The PoC circuit is used in automotive cameras, etc. to transmit both signals and the power supply along the same cable. This section introduces inductors for configuring the Bias-T required in PoC and noise suppression in PoC.
Noise suppression technologies/case study introduction (Automotive)
The PoC circuit is used in automotive cameras, etc. to transmit both signals and the power supply along the same cable. This section introduces inductors for configuring the Bias-T required in PoC and noise suppression in PoC.
Noise suppression technologies/case study introduction (Automotive)
The PoC circuit is used in automotive cameras, etc. to transmit both signals and the power supply along the same cable. This section introduces inductors for configuring the Bias-T required in PoC and noise suppression in PoC.
Noise suppression technologies/case study introduction (Automotive)
The PoC circuit is used in automotive cameras, etc. to transmit both signals and the power supply along the same cable. This section introduces inductors for configuring the Bias-T required in PoC and noise suppression in PoC.
In Part 2, we focus on two product categories among the vehicle-mounted inductor products developed and provided by Murata, and we asked engineers about the strengths of these products and the direction of future advancements.
